How to Align Scanned Maps with Real-World Coordinates

georeferencing in GIS

Your scanned map floats in the wrong place, and you need it to line up with everything else. Georeferencing in GIS fixes that: you link recognisable points on the scan to known coordinates, then transform the raster.

This guide is part of the wider topic of geospatial terrain visualization, where correctly placed rasters are the starting point.

Item Value
Georeferencing workflow in ArcGIS Pro Four steps
Minimum for a zero-order shift 1 control point
Minimum for a first-order (affine) transformation 3 control points
Minimum for a second-order transformation 6 control points
Minimum for a third-order transformation 10 control points

These figures come from Esri’s overview of georeferencing in ArcGIS Pro. Documentation and software change between releases, so check the source before you rely on them.

What georeferencing does to a scanned map

Scanned maps and historical data usually carry no spatial reference information, so a GIS cannot tell where the sheet belongs on the earth, as the ArcGIS Pro documentation explains. Modern satellite images and aerial cameras tend to have fairly accurate location information, though they may need slight adjustments to line up with your other layers.

Georeferencing defines the raster’s location using map coordinates and assigns the coordinate system of the map frame. Afterwards the raster can be viewed, queried, and analyzed with your other geographic data, according to the same overview.

georeferencing in GIS Paper maps
Numerous unfolded paper maps overlap across a wooden surface.

Sometimes a full warp is unnecessary. If the scan already has the right orientation and scale, you can simply shift it to its correct location, for example when street lines sit beside the image instead of on it, as the raster coordinate documentation illustrates.

The four-step georeferencing workflow

In ArcGIS Pro the work follows four steps, and the Georeference tab holds the tools for each, per the overview page.

  1. Add the raster dataset you want to align with your projected data.
  2. Create control points that connect your raster to known positions on the map.
  3. Review the control points and their errors.
  4. Save the georeferencing result once you are satisfied with the alignment.

To open the tab, select the layer in the Contents pane, then click Georeference on the Imagery tab, as described in the georeferencing tools reference. Its Prepare group helps you set up the source raster and target datasets before you add a single link.

How do you pick good control points?

A control point is a location you can identify accurately both on the raster and in real-world coordinates. Each connection between a point on the scan (the from point) and its match on the target (the to point) forms a control point pair, according to the ArcGIS Pro overview.

Features that the documentation lists as suitable include:

  • road or stream intersections
  • the mouth of a stream
  • rock outcrops
  • the end of a jetty of land
  • the corner of an established field
  • street corners and hedgerow intersections

Spread your links over the entire scan rather than bunching them in one area. A link near each corner plus a few across the interior typically produces the best results, and extra links do not automatically improve the registration, according to the same documentation.

Your result is only as accurate as the data you align it to. To keep errors down, georeference against data at the highest resolution and largest scale your project needs, as the overview advises.

Which transformation fits your scan?

The transformation uses your control points to shift and warp the raster into its correct location. ArcGIS Pro offers polynomial, spline, adjust, projective and similarity types, as the overview lists.

  • Zero-order polynomial: shifts your data and needs only 1 control point, which suits data that is already georeferenced but sits slightly off (source).
  • First-order (affine): shifts, scales and rotates the raster and needs 3 control points. Straight lines stay straight, but rectangles can become parallelograms (source).
  • Second- and third-order: bend or curve the raster and need 6 control points and 10 control points respectively (source).
  • Adjust: combines a polynomial transformation with triangulated irregular network (TIN) interpolation to balance global and local accuracy.
  • Similarity: tries to preserve the shape of the original raster, so its RMS error tends to be higher than other polynomial types.
  • Projective: especially useful for oblique imagery and scanned maps, and it transforms the source control points precisely onto the targets, though pixels between them may be less accurate (tools reference).

Plan to add more than 3 control points for a first-order fit, because a single inaccurate point has a much greater impact when you use few. The overview adds that transformations higher than third order are rarely needed and take progressively more processing time.

Lower orders tend to produce a random type error, while higher orders tend to produce an extrapolation error, according to the same page.

Reading the error before you save

The Control Point Table lists each pair with its starting coordinates, adjusted coordinates and residual error. The sum of the errors appears as the root mean square (RMS) error, as the tools reference describes.

With a minimum number of links, a first-order transformation can map each raster point exactly onto its target. Any extra links introduce residuals that spread across all the points, which is why a nonzero error is normal, according to the overview.

No universal pass mark exists. You must judge an acceptable RMSE from the positional accuracy of your input features and control points, and if it is too high, discard or replace links with large residuals, as the Calculate Transformation Errors page explains. That tool is meant for vector links, and it is used before transforming a large number of features.

When the numbers look right, save the result. If the scan still sits off its neighbours, the guide to GIS layers not aligning is a sensible next stop. Once placement is sound, the raster can sit alongside your data in terrain analysis in GIS.

Frequently asked questions

Can the software place control points for me?

Show answer

Auto Georeference can generate links by comparing your source raster with a target raster, but only if the two are fairly close in location, spectral resolution and spatial resolution, per the tools reference. Check anything it creates in the Control Point Table.

What if my scan only partly overlaps the reference data?

Show answer

Your links can only sit inside the shared area, so parts of the scan beyond it are unlikely to be properly aligned. A larger shared area gives you more widely spaced points, as the overview notes.

Can I keep my control points for another session?

Show answer

Yes. The Export Control Points button saves them to a georeferencing text file, and Import Control Points loads a file back into a session, either replacing or appending to existing links, according to the tools reference.

Why does the coordinate system matter?

Show answer

A map coordinate system rests on a projection, which is a way of portraying the curved earth on a flat surface (overview). For error checks on vector links, the Calculate Transformation Errors documentation warns that latitude and longitude values may cause distortion or calculation errors.